
24/7 emergency extraction, structural drying, and full restoration
Water Damage Cleanup Tampa FL Done Right the First Time
Water Damage Cleanup Tampa FL means stopping the water, pulling it out, and drying your structure before mold takes hold. We handle burst pipes, roof leaks, storm intrusion, and sewage backups across Hillsborough County. Our IICRC-certified crews arrive with truck-mounted extraction and thermal imaging, so hidden moisture gets found and fixed, not painted over. Call (813) 588-6476 any hour.
What's included
What Our Water Damage Cleanup Includes
Every water damage cleanup Tampa job starts with a full inspection and a written scope. Here is what is standard on our jobs, and what we add when the loss calls for it.
Moisture Inspection and Mapping
A Protimeter moisture meter and thermal imaging camera survey every affected room, plus adjacent spaces where water may have traveled. You get a clear picture of what is wet, how wet, and what it will take to dry it.
Water Extraction and Removal
Truck-mounted extraction units and submersible pumps remove standing water. Carpet, pad, and unsalvageable materials come out. We bag and haul debris so you are not left with a pile in the driveway.
Structural Drying Setup
Air movers, refrigerant or desiccant dehumidifiers, and Injectidry wall panels are placed based on the ANSI/IICRC S500 equipment ratios for your square footage. Dehumidifier drain tubing routes condensate outside so nothing gets re-wet.
Antimicrobial Treatment
EPA-registered antimicrobial disinfectant is applied to affected surfaces, with HEPA air scrubbers running to capture airborne spores. This is the step that keeps a water loss from becoming a mold job.
Daily Monitoring and Documentation
We log moisture readings and equipment placement every day and photograph the progress. You get the drying log and a written summary formatted for your insurance adjuster at the end of the job.
Service overview
What Water Damage Cleanup Tampa FL Actually Involves
Water Damage Cleanup Tampa FL is the process of removing standing water, extracting saturated materials, and drying a building back to its pre-loss moisture content. It starts with a moisture meter and thermal imaging camera to map where water traveled, then a truck-mounted water extraction unit or submersible pump pulls the bulk of it out. Air movers and refrigerant dehumidifiers do the rest. We follow the ANSI/IICRC S500 Standard for Professional Water Damage Restoration on every job, from a 40-gallon water heater leak to a flooded commercial floor.
Tampa homeowners call us most often after a burst pipe water damage event, a roof leak water intrusion during summer storms, or an appliance supply line leak behind the washer. Our humidity runs high most of the year, so wet drywall and saturated insulation that sits more than 24 to 48 hours becomes a mold problem fast. If you are searching for water damage cleanup near me in Tampa, we are the crew that shows up with the right gear and a drying plan, not a shop vac and a promise.
The service timeline
Our Water Damage Cleanup Process
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency Call
You call (813) 588-6476 and describe what happened. We ask where the water is coming from, whether it is clean or contaminated, and how long it has been sitting. That tells us what to load. A crew rolls immediately, day or night, and we give you a straight price range before we arrive.
Inspection and Mapping
On site, we use a Protimeter moisture meter and a thermal imaging camera to find water you cannot see, including moisture trapped in subfloors and behind baseboards. We categorize the water, measure affected square footage, and show you exactly what is wet and what it will take to dry it.
Water Extraction
A truck-mounted water extraction unit handles most residential jobs; standing water in crawl spaces or a flooded garage gets a submersible pump first. We pull carpet, pad, and any material that cannot be saved. Extraction usually takes two to four hours on a typical Tampa home.
Structural Drying
We set air movers and refrigerant or desiccant dehumidifiers to dry the structure. Injectidry panels push warm dry air behind walls without cutting them open when the situation allows. Most homes dry in three to five days, and we check readings daily until the structure hits its dry standard.
Final Verification
Before we pull a single air mover, we re-meter every affected area and compare it to an unaffected control room. You get the drying log, photos, and a written summary for your insurance claim. If any material still reads wet, the equipment stays. We do not close a job on a guess.
Tools & methods
Equipment and Standards We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Truck-Mounted Water Extraction Unit
Pulls hundreds of gallons of standing water fast on residential and commercial jobs. The workhorse for carpet, pad, and hard-surface extraction.
Submersible Pump
Used when water is too deep for standard extraction, such as a flooded garage, crawl space, or basement. Moves high volumes before we switch to extraction.
Thermal Imaging Camera
Finds moisture behind walls and under floors that a surface check misses. We use it to map the true extent of the loss before we set any equipment.
Protimeter Moisture Meter
Pin and pinless readings confirm moisture content in drywall, framing, and subfloor. Every daily reading on your drying log comes from this meter.
Dri-Eaz and Phoenix Dehumidifiers
Refrigerant and desiccant units pull moisture out of the air so wet materials can release it. Sized to your cubic footage per the S500 standard.
HEPA Air Scrubber and Negative Air Machine
Captures airborne spores and dust during contaminated-water cleanup. Negative air machines keep containment under pressure when mold risk is present.
Injectidry Wall Drying System
Pushes warm dry air into wall cavities through small ports, drying behind drywall without demolition when the drywall itself is salvageable.
Use cases
When to Call for Water Damage Cleanup
These examples show how the service framework adapts rather than forcing every call through one repair.

Storm Intrusion in Seminole Heights
A stalled summer storm pushed two inches of water under the back door of a 1948 bungalow. The back bedroom carpet and lower drywall were soaked, and water had traveled into the crawl space. → We removed the carpet and pad, cut drywall at the flood line, dried the framing and crawl space, and treated the area with antimicrobial. The room was dry in four days and rebuilt with moisture-resistant drywall.
Sewage Backup in South Tampa
A root-blocked lateral line backed sewage into a first-floor bathroom and hallway. The water was Category 3, and the vinyl flooring and lower drywall were contaminated. → Our AMRT-trained crew removed the affected flooring and drywall, disinfected the space, ran HEPA air scrubbers, and verified the structure dry in five days. The bathroom was rebuilt and back in service.
Problems we solve
Water Problems We Solve for Tampa Homes
Most water damage we see in Tampa starts small and gets expensive because nobody caught it in the first 24 hours. Here are the calls we run most often.
Burst pipe water damage behind a wall
We shut off the source, open the cavity where needed, extract, and dry the framing with directed air movers and Injectidry panels. Most single-room burst pipe jobs are dry in three to four days with no drywall replacement.
Storm and floodwater intrusion through doors and windows
We remove contaminated materials, apply EPA-registered antimicrobial disinfectant, run HEPA air scrubbers, and dry the structure to its dry standard. We document everything for your flood or homeowners claim.
Sewage backup and black water contamination
Our AMRT-trained technicians remove affected materials, disinfect the space, and verify with moisture and contamination checks before reconstruction. We treat every sewage backup as a Category 3 loss from the first minute.
Moisture trapped in subfloors after a slow leak
Thermal imaging and pin meters find the moisture a shop vac never reaches. We dry the subfloor with air movers and dehumidifiers, then re-meter to confirm it hit the dry standard before any flooring goes back down.
Pricing process
What Water Damage Cleanup Costs in Tampa
$800 - $3,500 for most residential jobs; larger storm and sewage losses priced by scope
Affected Square Footage
More wet area means more extraction time, more air movers, and more dehumidifier capacity. A 200-square-foot bathroom dries with far less equipment than a 1,200-square-foot open floor plan.
Water Category
Clean water from a supply line is the simplest. Category 3 water from sewage or flooding requires removal, disinfection, and HEPA filtration, which adds labor and disposal cost.
Materials Affected
Carpet and pad are cheap to replace. Hardwood, tile over a wet subfloor, and cabinetry raise the cost because drying and saving them takes more time and equipment.
Questions before we arrive
Frequently Asked Questions About Water Damage Cleanup in Tampa

How much does water damage cleanup cost in Tampa?
Most residential water damage cleanup in Tampa runs $1,200 to $3,500, with small single-room jobs starting around $800 and large storm or sewage losses going higher. Square footage, water category, and how many materials can be saved drive the number. We give you a written range before we start, and when the loss is covered, your out-of-pocket is usually just the deductible.
How long does water damage restoration take in Tampa, Florida?
Extraction takes two to four hours, and structural drying typically runs three to five days. Category 1 clean-water losses often finish in three days; sewage backup and black water contamination add a day or two for disinfection and verification. Tampa's humidity can slow drying, so we check moisture readings daily and keep equipment running until the structure hits its dry standard.
Who provides water damage cleanup near me in Tampa?
Tampa Water Force provides water damage cleanup near me in Tampa and across Hillsborough County, including New Tampa, Carrollwood, Seminole Heights, Westchase, Hyde Park, South Tampa, Tampa Palms, and Westshore. We are IICRC-certified, licensed and insured, and we run 24/7 emergency crews. Call (813) 588-6476 and we will give you an arrival window in minutes.
Can water restoration remove moisture hidden behind walls?
Yes. We use thermal imaging cameras and pin-type moisture meters to find water behind drywall and in wall cavities, then dry it with Injectidry panels and directed air movers that push dry air into the cavity without demolition when conditions allow. When the drywall is saturated or contaminated, we cut a flood line, dry the framing, and replace the moisture-resistant drywall.
Ready when you are
Need Water Damage Cleanup Tampa FL Right Now?
Every hour water sits, more material gets replaced. We are IICRC-certified, licensed and insured, and we answer the phone at 2 a.m. Call (813) 588-6476 and a Tampa crew rolls to your address with extraction and drying equipment ready.

Talk with the local team
Request Water Damage Cleanup
We answer the phone 24 hours a day, seven days a week, including holidays. Tell us what happened and where you are, and we will dispatch the nearest crew with extraction and drying equipment on board. Most Tampa addresses see us within 60 to 90 minutes.

